Last Updated
"Unknown error has occurred."(Unity/Unreal Engine/Settings)
"Unknown error has occurred.
Please re-select the device to connect to."
(Settings)
说明
当发生未知错误时，会显示此信息。
"Failed to detect Spatial Reality Display. Make sure Display cable is connected correctly between PC and Spatial Reality Display.
Please re-select the device to connect to."
(Settings)
"Failed to detect Spatial Reality Display. Make sure Display cable is connected correctly between PC and Spatial Reality Display.
The application will be terminated."
(Unity/Unreal Engine/Settings)
说明
无法检测Spatial Reality Display。显示屏电缆可能未正确连接。
如何处理
确保显示屏电缆（HDMI/DP（DisplayPort）/Type-C（AltMode））在 PC 和Spatial Reality Display之间正确连接。
"Failed to detect Spatial Reality Display. Make sure USB 3.0 cable is connected correctly between PC and Spatial Reality Display.
The application will be terminated."
(Unreal Engine/Settings)
说明
无法检测Spatial Reality Display（ELF-SR1）。PC 和Spatial Reality Display（ELF-SR1）之间的 USB 3.0 电缆可能未正确连接。
如何处理
确保 PC 和Spatial Reality Display（ELF-SR1）之间的 USB 3.0 电缆正确连接，并且Spatial Reality Display（ELF-SR1）已打开。
"Failed to detect Spatial Reality Display. Make sure USB cable is connected correctly between PC and Spatial Reality Display, and Spatial Reality Display device is powered on.
Please re-select the device to connect to."
(Settings)
"Failed to detect Spatial Reality Display. Make sure USB cable is connected correctly between PC and Spatial Reality Display, and Spatial Reality Display device is powered on.
The application will be terminated."
(Unity/Unreal Engine/Settings)
说明
无法检测Spatial Reality Display。 PC 和Spatial Reality Display之间的 USB 电缆可能未正确连接。
如何处理
确保 PC 和Spatial Reality Display之间的 USB 电缆已正确连接，并且Spatial Reality Display设备已打开。
"Failed to find Spatial Reality Display device. Make sure Spatial Reality Display device is powered on.
The application will be terminated."
(Unity/Unreal Engine/Settings)
说明
无法找到Spatial Reality Display设备。Spatial Reality Display设备可能未打开。
如何处理
确保Spatial Reality Display设备已打开。
"Display connection has been interrupted. The Display cable may be disconnected." (Unity)
说明
显示屏连接已中断。显示屏电缆可能已断开。
如何处理
检查 PC 和Spatial Reality Display之间的显示屏电缆并正确连接。
"USB connection has been interrupted. The USB cable may be disconnected or SR Display's power may be turned off.
The application will be terminated."
(Settings)
"USB connection has been interrupted. The USB cable may be disconnected or Spatial Reality Display device's power may be turned off.
The application will be terminated."
(Unity/Unreal Engine)
说明
USB 连接已中断。USB 电缆可能已断开或Spatial Reality Display设备的电源可能已关闭。
如何处理
请检查USB线连接情况，并检查Spatial Reality Display设备是否已打开电源。
"SR Display SDK is not found. SR Display SDK may be not installed correctly. Try to re-install with SR Display installer.
Please re-select the device to connect to."
(Settings)
"SR Display SDK is not found. SR Display SDK may be not installed correctly. Try to re-install with SR Display installer.
The application will be terminated."
(Settings)
"Spatial Reality Display SDK is not found. Spatial Reality Display SDK may be not installed correctly. Try to re-install with Spatial Reality Display Settings Installer.
The application will be terminated."
(Unity/Unreal Engine)
说明
未找到Spatial Reality DisplaySDK。Spatial Reality DisplaySDK可能未正确安装。
如何处理
安装或重新安装Spatial Reality DisplaySDK。
"Another Spatial Reality Display application is already running. Please close it and start this application again.
The application will be terminated."
(Unity/Unreal Engine)
说明
此应用程序无法启动，因为另一个Spatial Reality Display应用程序已在运行。
如何处理
请关闭另一个Spatial Reality Display应用程序并启动此应用程序。
"SR Display is not recognized correctly.
Please make sure SR Display and PC's USB 3.0 port are connected with USB3.0 cable.
Also, please try following steps.
1. Unplug USB cable from PC's USB 3.0 port.
2. Turn Spatial Reality Display device's power off.
3. Plug USB cable into PC's USB 3.0 port.
4. Wait for 30 seconds.
5. Turn Spatial Reality Display device's power on.
6. Launch this application again."
(Unreal Engine/Settings)
"Spatial Reality Display is not recognized correctly. Please make sure Spatial Reality Display and PC's USB 3.0 port are connected with USB3.0 cable. Also, please try following steps.
1. Unplug USB cable from PC's USB 3.0 port.
2. Turn Spatial Reality Display device's power off.
3. Plug USB cable into PC's USB 3.0 port.
4. Wait for 30 seconds.
5. Turn Spatial Reality Display device's power on.
6. Launch this application again."
(Unity)
说明
Spatial Reality Display无法正确识别。
如何处理
请按照信息中的步骤操作。
"The old version of the Spatial Reality Display SDK has been installed.
The Spatial Reality Display Settings Installer version 2.0 or later is required to run this application."
(Unity/Unreal Engine)
说明
已安装旧版本的Spatial Reality DisplaySDK。该应用程序需要Spatial Reality DisplaySDK 2.0或更高版本。
如何处理
重新安装Spatial Reality DisplaySDK 2.0 或更高版本。
"The Spatial Reality Display SDK version [2.4.0] or later is required to run this application. The currently installed version is [2.3.0].
Please re-install the Spatial Reality Display SDK with the latest version of the Spatial Reality Display Settings Installer.
The application will be terminated."
(Unity)
补充
[]中的数字是可变的。
说明
如果应用程序需要更高版本的 SDK，则会显示此消息。
如何处理
重新安装最新版本的Spatial Reality DisplaySDK。
"An older version of the Spatial Reality Display SDK is installed.
The Spatial Reality Display Settings Installer version 2.4.0 or later is required to run this application."
(Unreal Engine)
说明
安装了旧版本的Spatial Reality DisplaySDK。应用程序可能使用 2.4.0 或更高版本中的新功能。
如何处理
重新安装Spatial Reality Display Settings 2.4.0 或更高版本。
"The number of Spatial Reality Displays detected [3] is less than the number set in the project settings [4]." (Unity/Unreal Engine)
补充
[]中的数字是可变的。
说明
当连接到 PC 的Spatial Reality Display数量少于应用程序指定的Spatial Reality Display数量时，会显示此消息。
如何处理
请将应用程序指定数量的Spatial Reality Display连接到PC。
"The Multi Display Mode set in the project settings ([Vertical]) does not match that of the Spatial Reality Display Settings ([Horizontal])." (Unity/Unreal Engine)
补充
多显示模式将输入[]内。
说明
应用程序指定的多显示模式和Spatial Reality Display Settings中设置的多显示模式不同。
如何处理
将Spatial Reality Display Settings中的多显示模式更改为应用程序指定的多显示模式。
"No Spatial Reality Display is connected. Please make sure that Spatial Reality Display is connected with your PC correctly." (Unity)
说明
在编辑器中运行时，尝试在Spatial Reality Display上显示全屏游戏视图，但未找到Spatial Reality Display。
如何处理
确保Spatial Reality Display已打开，或PC和Spatial Reality Display之间的显示屏电缆已正确连接。
"Spatial Reality Display device is not selected." (Unity)
说明
在Unity编辑器中未选择“SRDisplay GameView（全屏）”。因此应用程序无法启动预览。
如何处理
请在 Unity 编辑器的“SpatialRealityDisplay”菜单中选择“SRDisplay GameView(全屏)”。
"Spatial Reality Display Plugin does not support "Mobile Preview ES3.1 (PIE)"." (Unreal Engine)
说明
如果选择“Standalone Game Mobile”，则会显示此消息，因为不支持虚幻引擎的插件。
如何处理
请使用“VR 预览”。
"Unknown error has occurred."(Unity/Unreal Engine/Settings)
"Unknown error has occurred.
Please re-select the device to connect to."
(Settings)
Explanation
This message is displayed when an unknown error occurs.
"Failed to detect Spatial Reality Display. Make sure Display cable is connected correctly between PC and Spatial Reality Display.
Please re-select the device to connect to."
(Settings)
"Failed to detect Spatial Reality Display. Make sure Display cable is connected correctly between PC and Spatial Reality Display.
The application will be terminated."
(Unity/Unreal Engine/Settings)
Explanation
The Spatial Reality Display could not be detected. The USB 3.0 cable may not be connected correctly between the computer and the Spatial Reality Display (ELF-SR1).
Solution
Make sure the USB 3.0 cable is correctly connected between the computer and the Spatial Reality Display (ELF-SR1), and power on Spatial Reality Display (ELF-SR1).
"Failed to detect Spatial Reality Display. Make sure USB 3.0 cable is connected correctly between PC and Spatial Reality Display.
The application will be terminated."
(Unreal Engine/Settings)
Explanation
Failed to detect Spatial Reality Display(ELF-SR1). USB 3.0 cable may be not connected correctly between PC and Spatial Reality Display(ELF-SR1).
How to deal with
Make sure USB 3.0 cable is connected correctly between PC and Spatial Reality Display(ELF-SR1), and Spatial Reality Display(ELF-SR1) is powered on.
"Failed to detect Spatial Reality Display. Make sure USB cable is connected correctly between PC and Spatial Reality Display, and Spatial Reality Display device is powered on.
Please re-select the device to connect to."
(Settings)
"Failed to detect Spatial Reality Display. Make sure USB cable is connected correctly between PC and Spatial Reality Display, and Spatial Reality Display device is powered on.
The application will be terminated."
(Unity/Unreal Engine/Settings)
Explanation
The Spatial Reality Display could not be detected. The USB cable may not be connected correctly between the computer and the Spatial Reality Display.
Solution
Make sure the USB cable is correctly connected between the computer and the Spatial Reality Display, and power on the Spatial Reality Display.
"Failed to find Spatial Reality Display device. Make sure Spatial Reality Display device is powered on.
The application will be terminated."
(Unity/Unreal Engine/Settings)
Explanation
The Spatial Reality Display device could not be found. The Spatial Reality Display device's power may be turned off.
Solution
Power on the Spatial Reality Display.
"Display connection has been interrupted. The Display cable may be disconnected." (Unity)
Explanation
The connection between the computer and the Spatial Reality Display was interrupted while the application was running.
Solution
Check the display cable between the computer and the Spatial Reality Display and make sure it is connected correctly.
"USB connection has been interrupted. The USB cable may be disconnected or SR Display's power may be turned off.
The application will be terminated."
(Settings)
"USB connection has been interrupted. The USB cable may be disconnected or Spatial Reality Display device's power may be turned off.
The application will be terminated."
(Unity/Unreal Engine)
Explanation
The USB communication was interrupted. The USB cable may be disconnected or the Spatial Reality Display device's power may be turned off.
Solution
Please check the USB cable connection and make sure the Spatial Reality Display device's power is turned on.
"SR Display SDK is not found. SR Display SDK may be not installed correctly. Try to re-install with SR Display installer.
Please re-select the device to connect to."
(Settings)
"SR Display SDK is not found. SR Display SDK may be not installed correctly. Try to re-install with SR Display installer.
The application will be terminated."
(Settings)
"Spatial Reality Display SDK is not found. Spatial Reality Display SDK may be not installed correctly. Try to re-install with Spatial Reality Display Settings Installer.
The application will be terminated."
(Unity/Unreal Engine)
Explanation
The Spatial Reality Display SDK could not be found. The Spatial Reality Display SDK may not be installed correctly.
Solution
Install or re-install the Spatial Reality Display SDK.
"Another Spatial Reality Display application is already running. Please close it and start this application again.
The application will be terminated."
(Unity/Unreal Engine)
Explanation
This Application cannot start because another Spatial Reality Display application is already running.
Solution
Close any other Spatial Reality Display application that is currently running then start this application.
"SR Display is not recognized correctly.
Please make sure SR Display and PC's USB 3.0 port are connected with USB3.0 cable.
Also, please try following steps.
1. Unplug USB cable from PC's USB 3.0 port.
2. Turn Spatial Reality Display device's power off.
3. Plug USB cable into PC's USB 3.0 port.
4. Wait for 30 seconds.
5. Turn Spatial Reality Display device's power on.
6. Launch this application again."
(Unreal Engine/Settings)
"Spatial Reality Display is not recognized correctly. Please make sure Spatial Reality Display and PC's USB 3.0 port are connected with USB3.0 cable. Also, please try following steps.
1. Unplug USB cable from PC's USB 3.0 port.
2. Turn Spatial Reality Display device's power off.
3. Plug USB cable into PC's USB 3.0 port.
4. Wait for 30 seconds.
5. Turn Spatial Reality Display device's power on.
6. Launch this application again."
(Unity)
Explanation
The Spatial Reality Display could not be recognized correctly.
Solution
Please follow the steps in the message.
"The old version of the Spatial Reality Display SDK has been installed.
The Spatial Reality Display Settings Installer version 2.0 or later is required to run this application."
(Unity/Unreal Engine)
Explanation
The application requires the Spatial Reality Display SDK version 2.0 or later, but an older version of the Spatial Reality Display SDK is currently installed on your computer.
Solution
Install the version 2.0 or later of the Spatial Reality Display SDK.
"The Spatial Reality Display SDK version [2.4.0] or later is required to run this application. The currently installed version is [2.3.0].
Please re-install the Spatial Reality Display SDK with the latest version of the Spatial Reality Display Settings Installer.
The application will be terminated."
(Unity)
Note
The version numbers inside the brackets [] will reflect the actual values.
Explanation
This message is displayed if the application requires a newer version of the Spatial Reality Display SDK than the one currently installed.
Solution
Re-install the latest version of Spatial Reality Display SDK.
"An older version of the Spatial Reality Display SDK is installed.
The Spatial Reality Display Settings Installer version 2.4.0 or later is required to run this application."
(Unreal Engine)
Explanation
The application uses features that require version 2.4.0 or later of the Spatial Reality SDK to be installed on the computer.
Solution
Re-install Spatial Reality Display Settings 2.4.0 or later.
"The number of Spatial Reality Displays detected [3] is less than the number set in the project settings [4]." (Unity/Unreal Engine)
Note
The numbers inside the brackets [] will reflect the actual values.
Explanation
This message is showed for Multi Display applications if the number of Spatial Reality Displays connected to the computer is less than the number of Spatial Reality Displays required by the application.
Solution
Connect the number of Spatial Reality Displays required by the application to the computer.
"The Multi Display Mode set in the project settings ([Vertical]) does not match that of the Spatial Reality Display Settings ([Horizontal])." (Unity/Unreal Engine)
Note
The Multi Display modes inside the brackets [] will reflect the actual values.
Explanation
The Multi Display mode required by the application and the Multi Display mode set in the Spatial Reality Display Settings are different.
Solution
Change the Multi Display mode in the Spatial Reality Display Settings to match the Multi Display mode required by the application.
"No Spatial Reality Display is connected. Please make sure that Spatial Reality Display is connected with your PC correctly." (Unity)
Explanation
This message is displayed when trying to display the SRDisplay GameView inside the Unity Editor, but no Spatial Reality Display was found.
Solution
Make sure the Spatial Reality Display is turned on and that the display cable between the computer and the Spatial Reality Display is connected correctly.
"Spatial Reality Display device is not selected." (Unity)
Explanation
"SRDisplay GameView(Full Screen)" is not selected in the Unity Editor, therefore the preview cannot be started.
How to deal with
In the Unity Editor, please select "SRDisplay GameView(Full Screen)" from the "SpatialRealityDisplay" menu.
"Spatial Reality Display Plugin does not support "Mobile Preview ES3.1 (PIE)"." (Unreal Engine)
Explanation
This message will be displayed if you select "Standalone Game Mobile" because the Plugin for Unreal Engine is not supported.
Solution
Please use "VR Preview" instead.
Was this article helpful?